Product Summary
289, 302, 351W, 5.0L, Assembled Cylinder Head Style
- Features 58cc combustion chambers
- Made from high density cast iron material
- Spring seats are machined for 1.560″ and 1.250″
- Has a multi-angle intake and radiused exhaust valve job
- The intake valve seats are integral and the exhaust seats are hardened.
Installation Tips !
These particular heads come assembled with flat tappet springs. They can be used with a racing solid lifter camshaft, or they could also be used with a hydraulic roller camshaft. Using them in conjunction with a solid roller camshaft would require changing the valve springs on the heads.
Adjustable rockers recommended. 1.6 ratio (use of 1.73 ratio will require elongation of pushrod holes)
Details
When it comes to high performance replacements for factory cast iron heads, World’s WINDSOR JR. has the market covered with 180cc intake runners, plus the 64cc exhausts ports are substantially larger than OEM Ford heads. Add a highly efficient combustion chamber design and larger valves and you have big bolt-on power. This head is also a 50-State emissions legal factory replacement. The WINDSOR series of heads are the cost-effective choice for serious power from your 302! Studs and guide plates not included.
- Head is sold individually
- High density cast iron material
- 58cc Combustion Chambers
- Intake Runner: 180cc
- Exhaust Port: 64cc, standard location (dual exhaust bolt pattern to accommodate large custom headers)
- Machined for 1.94″ Intake & 1.60 Exhaust valves (11/32″ stem)
- Valve Seats: Intake (integral), exhaust (hardened)
- Valve Guides: Integral cast iron
- Spring Seats: Machined for 1.560″ and 1.250″
- Raised Valve Cover Rail
- Spark Plugs: 14MM, .460″ Reach with 5/8″ Hex Plugs, Tapered Seat, (Accel 276 or 276S or equivalent)
- Valve Job: Multi-angle intake and radiused exhaust
- Valve Angle: Stock 20°
- Manley stainless steel valves
- Adjustable rockers recommended. 1.6 ratio (use of 1.73 ratio will require elongation of pushrod holes)
- 7° Manley retainers and keepers
- 1.437″ Dual Valve Springs
- Max Lift .600″
- 125 lbs seat pressure @ 1.850″ install height
- 340 lbs seat pressure @ 1.210″ install height
- Coil bind @ 1.160″
- IMCA approved for Stock Cars, Northern & Southern Sport Mods and Hobby Stocks
Item Details
053030-2
Assembled head, for Mechanical flat tappet
or hydraulic roller camshaft
Specs
- Intake Port Dimension 1.98″ X 1.09″
- Exhaust Port Dimension 1.30″ X 1.22″
Head Flow @ .600″ Lift
- 236 intake, 169 exhaust (Super Flow 1050)
- 254 intake, 176 exhaust (Super Flow 600)
All heads flowed with a standard .750″ intake plate, without exhaust tube, and 28″ of water.
Gaskets Recommended:
- Head Gasket: Fel Pro 1011 or Speedway 344-1011
- Intake Gasket: Fel Pro 1250
- Exhaust Gasket: Fel Pro 1415 or Speedway 344-1415
KEY SPECS |
|
---|---|
MFG. Part # | 053030-2 |
Brand | World Products |
Cylinder Head Style | Assembled |
Material Type | Cast Iron |
Finish | Natural |
Combustion Chamber Volume | 58cc |
Intake Runner Volume | 180cc |
GENERAL |
|
Combustion Chamber Volume Range | 50cc – 59cc |
Intake Runner Volume Range | 180cc – 189cc |
Intake Port Shape | Rectangle |
Exhaust Port Shape | Square |
Intake Valve Diameter | 1.94″ |
Exhaust Valve Diameter | 1.6″ |
Sold in Quantity | Each |