Product Summary
Power Rack Type, 49.00″ Center to Center, 5.00″ Travel
- Can be used with most GM steering pumps
- Specifically designed for the 1955-57 Chevy cars
- Center to center measures 49″ and is has 5″ of travel
- Designed to bolt in using the original mounting holes
- Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines
Installation Tips !
- Our headers 930-C5 and 930-C5H will work with a Small Block and this rack and pinion steering. Our tight-fit headers and manifolds WILL NOT work.
- If using this rack & pinion kit with a big block (396-502 c.i.), you will need to use a C-notched oil pan, and special headers will be needed from TRI-5 R&D.
- Although this kit is fairly simple to install, some modifications are necessary.
- Before starting installation, please be aware of the modifications that are needed to install.
- Please be aware of the specific applications that this kit is intended to fit as outlined above.
- Due to application variables, this kit may not fit all applications and therefore it is recommended to verify that the kit will fit your vehicle combination prior to altering vehicle.
Details
Finally a bolt-on power rack and pinion for 1955-57 Chevy cars. Simply remove the original steering box, idler arm and tie rod assembly and bolt this unit back in using the original mounting holes. Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines. Can be used with most GM steering pumps.
- This item must be used with OEM style spindles. It WILL NOT work with dropped spindles.
- Designed for use with S/B Chevy 265-400 c.i. V-8 with side engine mounts only.
- Must use chassis headers and a stock type pan sump for clearance.
- Steering U-joint 910-32255 is required (17mm).
Charts
-
910-32246 Instructions (PDF)
KEY SPECS |
|
---|---|
MFG. Part # | 8010600 |
Brand | UniSteer |
Rack Type | Power |
Finish | Powder Coated |
Material Type | Steel |
GENERAL |
|
Center to Center | 49.00″ |
Turns Lock to Lock | 2.65 |
Travel | 5.00″ |
Thread Pitch | M14x1.5 |
Sold in Quantity | Each |
Notes | Uses 16mm-DD for the coupler |