Generac 32kW Generator
32kW NG or LP Configurable for 208, 240, 480 Volts EPA Certified Single Side Maintenance
The Generac 32 kW Generator adds well-known features to new improvements with the Protector XG series. The 32kW XG03245 has a 4.5 Liter engine that runs at 1800 RPM under load and 1200 RPM during self test or at low idle. A NEW Power Zone 410 Controller brings the latest in technology with additional functionality and more features than ever before, including the ability to select the fuel type at the controller without any other modifications. This controller is NFPA 110 capable.
XG 3-Phase generators have a 12-lead alternator hardwired to a terminal block. A Voltage Control Cartridge (VCC) makes the necessary connections for 208 Volt, 240 Volt, or 480 Volt 3 Phase Power. Generac Configures the 3-Phase generator at the factory with a 208-Volt Voltage Control Cartridge (VCC). At Installation, the installer can replace the VCC with a 240-Volt, or 480-Volt VCC if necessary.
Important: Use with an RTS 3-Phase Transfer Kit Requires a 3-Phase Voltage Sensing Kit
- 120/208 Volts 3 Phase (“G” Voltage) order Voltage Sense Kit 7411
- 120/240 Volts 3 Phase (“J” Voltage) order Voltage Sense Kit 7411
- 277/480 Volts 3 Phase (“K” Voltage) order Voltage Sense Kit 7412
32kW Standard Features
The new XG series carries forward the familiar features found in earlier models like quiet operation. A Generac 4.5-liter engine beats the competition on fuel efficiency for comparable generator models that produce less power. The XG maintains its UL-2200 listing along with the EPA Certification. An aluminum enclosure guards the generator against corrosion. Protected by a Generac 5-year/2000-hour limited warranty.
Generac didn’t stop with the features that Protector Series users came to expect.
New 32 kW Generator Features
New Electro-Galvanized base frame components prevent rust and corrosion. Single-side regular maintenance make service fast and easy through the front, key-locked panel. Change or check the oil, oil filter, and air filter; check or change the coolant; replace the spark plugs or check the battery.
Fuel setup is made easier than ever through the controller. Set the fuel type in the controller—no other adjustments are necessary.
The generator exercises at 1200 RPM for a peaceful 58 dBA noise level and 64 dBA under normal load. The PowerZone 410 Controller has more features and more capability than ever before, including an overload control that eliminates the need for a circuit breaker.
Cellular connectivity is standard for Mobile Link & Fleet.
Product Specifications
Model
Model Number; XG03245CNAX
Manufacturer; Generac Power Systems
Made In USA; Yes
Rated Watts; 32kW
Rated Amps; 111 Amps at 208 Volts | 96 Amps at 240 Volts | 48 Amps at 480 Volts
Voltage; Factory Configured for 208 Volts 3-Phase. Configurable for 240 Volts or 480 Volts.
A/C Ton Rating; 5-Ton
Enclosure; Aluminum Enclosure
UL Listed; UL-2200
Decibel Rating; 58 dBA Quiet Test or Low Idle, 64 dBA Normal Load
Type; Standby Generator
Series Name; Protector Gas
Features
Starting System; Automatic
Low Oil Alert; Low Oil Shutdown
Mainline Breaker; Optional Accessory—Controller Provides Overcurrent Protection
Battery Requirement; 12-Volt Group 27R, 725 CCA
Mounting Pad; Prepared Site Required
Weight; 1780
Dimensions; 83.4L x 34W x 45.2H inches
Warranty Information
Consumer Warranty; Generac 5-Year / 2000-Hour Limited Warranty
Commercial Warranty; Generac 5-Year / 2000-Hour Limited Warranty
Engine
Engine Brand; Generac
Engine Size; 4.5 Liter
Engine RPM; 1800 RPM
Cast Iron Sleeve; Yes
Cooling System; Liquid Cooled
Alternator
Alternator Type; Synchronous Self-Excited 12-Lead
Frequency; 60 Hertz
Auto Voltage Regulation; Yes
Fuel
Fuel Type; Natural Gas or Liquid Propane
NG Power Capacity; 32kW
LP Power Capacity; 32kW
NG Consumption @ Full Load; 406 Cubic Feet per Hour
NG Consumption @ Half Load; 240 Cubic Feet per Hour
LP Consumption @ Full Load; 4.9 Gallons per Hour
LP Consumption @ Half Load; 3.4 Gallons per Hour
Reviews
There are no reviews yet.