Product Summary
305, 350, Dual Plane Intake Manifold Type, Aluminum
- Accepts A/C, alternator, and exhaust heated chokes
- The patented runner design ensures broad torque curve
- Offers excellent throttle response and mid-range power
- Has a dual-plane low-rise intake with 180 deg firing order
- Specially designed for the 1987-1995 Small Block Chevy with iron heads
Details
PERFORMER – FOR 1987-95 CAST IRON CYLINDER HEADS (IDLE-5500 RPM)
Designed for street 262-400 c.i.d. Chevy V8’s that have heads with canted center bolt holes. Accepts late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers. #2104 accepts exhaust-heated chokes. For 1987-95 stock aluminum heads use #2101. Will not fit Chevrolet Bowtie or LT1 heads.
- Cast Aluminum Finish
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Charts
-
Installation Instructions (PDF)
KEY SPECS |
|
---|---|
MFG. Part # | 2104 |
Brand | Edelbrock |
Intake Manifold Type | Dual Plane |
RPM Range | Idle-5,500 |
Material Type | Aluminum |
GENERAL |
|
Carburetor Quantity | One |
Carburetor Flange Type | Dual: Square and Spread Bore |
Finish | Natural |
EGR | No |
Intake Section Included | Complete |
Gaskets Included | No |
Overall Height | 4.05″ |
Bolt Hole Pattern | 5.160″ x 5.625″ |
Sold in Quantity | Each |
Notes | This manifold is designed for cast iron heads with canted center bolt holes. They accept late model water necks, A.C. compressors, alternators, and HEI distributors. These manifolds have rear water crossovers and accept exhaust heated chokes. These mani |
GTIN Code | 085347021048 |
Reviews
There are no reviews yet.